Shanghai Chucheng Information Technology Co.,Ltd.

Quick DetailsPlace of Origin:Guangdong, China (Mainland)Brand Name:HuaweiModel Number:OSN 500Dimension:44 mm x 442 mm x 220 mmOperating temperature:-5? ~ 65?Operating humidity:5% ~ 95%DC Power:-38.4~ -72VAC Power:100~240VSupported interfaces:SDH/PDH/CES/EthernetService slots:3 slotsWeight:at most 5 KgPacket Switch Capacity:7.2 Gbit/sPackaging & DeliveryPackaging Details:Original Huawei packing or according to the customer's requirementsDelivery Detail:Within 5 working days after receipt of paymentHuawei 1U Optical Transmissoin System OptiX OSN 500 SDH EquipmentProduct Description??The OptiX OSN 500 is a packet-oriented new-generation multi-service customer premises equipment (CPE) optical transmission system, which is positioned at the access layer among Huawei's end-to-end multi-service transmission platform (MSTP) product series. This system is characterized by its low power consumption and compact structure. ??The OptiX OSN 500 supports multiprotocol label switching (MPLS), MPLS-transport profile (MPLS-TP), pseudo wire emulation edge-to-edge (PWE3), Ethernet, and ATM technologies. With these technologies, a pure PTN network can be provisioned. ??As the access layer equipment, the OptiX OSN 500 is networked with other OptiX OSN equipment to provide a complete solution covering the backbone layer, aggregation layer, and access layer. The complete solution meets 2G/3G/LTE base station backhaul and enterprise leased service access demands.Detailed ImagesSpecificationsItemDescriptionBoard?System control, switching, and timing boards: CSHD?Packet processing boards:?EF8F/EM6T/EM6F/CQ1/MD1?Auxiliary boards: FAN?Power supply boards: PIU and UPMFor services and ports supported by the preceding boards, see?Table 1.Packet functions and features?Service features?QoS features?Hardware-based OAM?Carrier-class protection?Clock synchronizationSwitching capacity7.2 Gbit/sEquipment-level protection?1+1 protection for input power?Fan protection (The failure in a single fan does not affect the operation of the other fans.)Intelligent fan speed adjustmentSupports automatic adjustments of fan speeds based on the highest temperature of boards in the chassis.Management ports and auxiliary portsPort TypeDescriptionConnectorExternal clock port120-ohm external clock port, which can work in 2048 kbit/s or 2048 kHz modeRJ45External time port/Port for monitoring an outdoor cabinet?External time port: The equipment provides two external time input/output ports.?Port for monitoring an outdoor cabinet: The equipment provides one port for monitoring and managing an outdoor cabinet.RJ45Power supply portTwo -48/-60 V DC power ports4-pin terminal blockNMS management portNMS port/NMS serial port, which connects to an NMSRJ45Alarm input/output port3-input/1-output alarm portRJ45Service Board/ PortBoard ClassificationBoard AcronymBoard NamePort TypeSystem control, switching, and timing boardTNH1CSHDPacket system control, switching, and timing board?Supports 7.2 Gbit/s packet switching capacity.?Provides two GE/FE SFP optical/electrical ports, four FE electrical ports, and sixteen E1 ports.?Performs system communication and control.?One Ethernet NM port?One NM serial port?3-input/1-output alarm port?1-input/1-output external clock port?2-input/2-output external time port?Four FE electrical ports: 10/100BASE-T(X)?Two GE/FE optical/electrical ports that use any of the following types of SFP modules:1000BASE-SX/1000BASE-LX/1000BASE-VX/1000BASE-ZX/1000Base-T/100BASE-BX/100BASE-FX/100BASE-LX/100BASE-VX/100BASE-ZX?16 E1 portsPacket processing boardTNM1MD132xsmart E1 service processing board75/120-ohm E1 portTNM1EM6TFE/GE processing board?Four FE electrical ports: 10/100BASE-T(X)?Two GE electrical ports (compatible with FE electrical ports): 1000BASE-TTNM1EM6FFE/GE processing board?Four FE electrical ports: 10/100BASE-T(X)?Two ports that use any of the following types of SFP modules:1000BASE-SX/1000BASE-LX/1000BASE-VX/1000BASE-ZX/1000Base-T/100BASE-BX/100BASE-FX/100BASE-LX/100BASE-VX/100BASE-ZXTNM1CQ14-port channelized STM-1 service processing board?Four STM-1 SFP optical/electrical ports of the S-1.1, L-1.1, or L-1.2 optical type or of SFP electrical modulesTNM1EF8F8xFE processing board?Eight FE SFP optical/electrical ports:?100BASE-BX/100BASE-FX/100BASE-LX/100BASE-VX/100BASE-ZX/100BASE-TPower supply boardUPMUninterruptible power module?One 110 V/220 V AC power input port?Two -48 V DC power output portsTNC1PIUPower supply boardOne -48 V/-60 V DC power input portFan boardTNC1FANFan boardN/AProduct FeaturesHigh Availability, Low Power Consumption, and Compact StructureThe OptiX OSN 500 is access layer equipment, which features high availability, low power consumption, and compact structure. The OptiX OSN 500 supports: ??Network-level protection such as Multiprotocol Label Switching (MPLS) automatic protection switching (APS), Multiple Spanning Tree Protocol (MSTP), Ethernet ring protection switching (ERPS), link aggregation group (LAG), Multi-Link Point-to-Point Protocol (ML-PPP), linear multiplex section protection (LMSP), and link-state pass through (LPT), which significantly improves equipment reliability. ??A maximum power consumption of 100 W, and a typical power consumption of only 35 W ??Dimensions (H x W x D) of 44 mm x 442 mm x 220 mm, and installation in an ETSI or 19-inch cabinet, or open rack, or on a wall or desk.Pure Packet Architecture and Multi-Service Transmission SupportThe OptiX OSN 500 supports service bearing in the PTN domain. The solution improves based on the service changes that take place due to radio mobile network evolution. Therefore, this solution can meet the transmission requirements of not only 2G and 3G networks, but also the future LTE and 4G networks. Its access and transmission of ATM/Ethernet/MPLS/MPLS-TP services meet multi-service application demands.End-to-End Service Configuration, One-Click Commissioning, and One-Click Fault Locating (TP-Assist)Compared with legacy TDM networks, PTN networks have the following characteristics in terms of O&M: ??Lack of overheads indicating the physical states of networks. When a fault occurs on a PTN network, no visual and fast indicator is available to locate the fault. ??Networking diversity and complication, which require powerful O&M capabilitiesTo address those issues, the equipment uses the TP-Assist to provide more O&M means and simplify O&M operations for PTN networks during installation, commissioning, service configuration, fault locating, and routine maintenance. With the TP-Assist, PTN networks have the SDH-like O&M capabilities, which reduce the technical requirements for O&M personnel and improve O&M efficiency.Hierarchical OAMThe OptiX OSN 550 supports the hierarchical OAM functions and have the SDH-like O&M capabilities. It can quickly detect and locate faults at each layer.The hierarchical OAM functions include ETH-OAM, MPLS tunnel/PW OAM, and MPLS-TP tunnel/PW OAM. Figure : Application of hierarchical OAMOur ServicesPackaging & ShippingTrade terms: FOB,CIF,CFR,etc.Price terms:L/C,D/P,T/T,Western Union,Paypal.Payment terms:T/T in advancePort: ShanghaiLead time: waithin 5 working days after receipt of paymentShipment:Express,Air,SeaSample availability: Yes(not free)??

•